697 reviews analysed
1. Mullard 12AX7 Preamp Vacuum Tube, Single
2. Rockville BluTube 70W Tube Amplifier/Home Theater Stereo Receiver with Bluetooth
- Rockville BluTube Bluetooth tube 70 watt amplifier/home theater stereo receiver
- Rockville BluTube audiophile grade tube amplifier with Bluetooth. 25 watts x 2 RMS @ 8 ohm. 35 Watts x 2 RMS @ 4 ohm. Tube Amps do not hard-clip even at high volumes and are extremely efficient. Due to this the amp sounds more like double the rated power!.
- Built in Bluetooth with 33 foot range. Built-in preamplifier. (2) sets of RCA inputs to connect to any audio device like a TV, laptop, or MP3 player, etc.
- Headphone output. Vu meter. Adjustable bass and treble (2 band equalizer). USB input for music files from USB thumb drive. Usb can charge your phone or other USB device. Rear speaker terminals: banana Plug/ binding post outputs for 2 speakers.
- Frequency response (3dB): 25hz-20khz. Input impedance: 47Ko. Input sensitivity: 300mV. Output Impendence: 4-8ohm. Total harmonic distortion): =0.02%. Signal-to-Noise ratio(s/n): =86dB. Bluetooth: 2.1+Edr. Usb: Supports WAV/MP3/WMA/APE/FLAC. 110V/220V switchable. Unit weight: 6.6 lbs. Unit dimension: 10.6″X10.2″X5.1″.
3. JJ Electronics Amplifier Tube (T-6L6GC-JJ-MP)
- Octal power tube (max plate Watts = 30W)
- This Slovakian tube has colorful lows, loose/ easy-going mid Body and a brightly shining chime for the highs
- In overdrive, it offers a tight and focused bite with crisp, bright and well-defined articulation
- Available in Singles, Apex Matched Pairs or Apex Matched Quads – please select from list.
4. Universal 1.25-Inch Extension Wands 1-1/4inch Vacuum Accessory 34.2 inch Extension Wand 2 Pieces
- Enable the vacuum to reach hard to reach places, such as under furniture and high places
- The inner diameter of the large end is 32mm, the outside diameter of the small end is 31mm. Work with 1-1/4inch(32mm) hose end
- Length: 17.7inch, 2 extension wand can be extend to 34.2inch
- Fit many vacuum brands accepting 1-1/4inch inner diameter attachment
- 2 wands included
1-1/4inch(32mm) iner diameter extension wand, only for vacuums accepting 32mm wands. Please make sure your vacuum size or measure the size of your vacuum before purchasing.
5. NinjaTek 3DNF01117505 NinjaTek NinjaFlex TPU Filament, 1.75mm, TPE.5kg, Midnight (Black) (Pack of 1)
Ninja Flex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. KEY FEATURES: Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking Polyurethane composition allows for excellent vibration reduction Patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, high quality prints Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available.
By our suggestions above, we hope that you can found 2100Mm Vacuum Tubes for you.Please don’t forget to share your experience by comment in this post. Thank you!