679 reviews analysed
1. ChgImposs 110V 300W Mini Heat Gun, Portable Hot Air Gun Shrink Electrical Heat Tool for DIY Embossing, Shrink Wrapping, Drying Paint
- Easy to use, just keep about 5-6cm distance from your DIY craft and heat it at about a 45 degree angle so that avoiding hurt by it
- Made of high-quality ABS plastic outside and stainless steel inside, heat resistance, low temperature resistance, simple and durable
- The length of wire is about 1M / 3Ft, you can do it what you want. Dimension: 225 x 47mm / 8.86 x 1.85″
- The temprature can not adjustable, in theory, it can reach at 200°C/392°F within a few seconds, which heat up quickly and works like a charm
- It works great for crafts, DIY and stripping paint，electronics, beading, or melting items, ceramic creations，rubber stamp, embossed powder, heating shrinkable film, heat shrink tubing, embossing, shrink wrapping packages,etc
– 100% stainless steel bearing twist
– Power cord, metal energy saving
– Safety switch port, electric shock
– Professional vents design, long life
– Rated temperature greater than 200 degrees
– DIY Supplies: DIY soft rubber stamp, convex relief powder, powder, heat shrinkable film
Output Power: 300W
Line Length: Approx 1M / 3Ft
Size: 225 x 47mm / 8.86 x 1.85″
Power Supply Type: AC Power Supply
Rated Temperature: >200 °C
Product Weight: 221 G / 7.80 Ounces
Product Dimensions (L*W*H) : 225*38*38 MM / 8.86*1.50*1.50 Inches
– Don’t blow it directly at 90 degrees with a hot air gun.
– The recommended distance from the hot air gun tuyere is 50 – 60mm away from the heating items.
– The single use time of the hot air gun should not be too long, usually 2 – 3 minutes. If the temperature of the fuselage is obviously increased, please close the hot air gun and wait for the cooling to use.
1 x Hot Air Gun
1 x Manual
2. LDK Mini Heat Gun, Electric Phone Repair Tool Compact Hot Air Gun for DIY Shrink Wrap Drying Paint Embossing 110V 300W
- ★ Hot air shrink gun was made of high quality stainless steel and ABS plastic, mini dimensions 225*47mm / 8.86*1.85in.
- ★ Handing part adopts salient point nonskid designs that cause safe hand holding with small energizing.
- ★ Voltage&Cooling Holes: Voltage 110V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life.
- ★ Suitable for: This excellent compact heat gun can be used for heating shrinkable film, embossed powder, rubber stamp. Built-in stand for self-support and table top use.
- ★ Warm Tips: The temp of the nozzle could reach to 200° in seconds, please don’t use it more than 10 minutes in one time. [12 Month Warranty] [100% Money Back Guarantee] If you’re not happy for any reason, simply contact us and we’ll give you a full refund and no need to return the product.
Type: Constant temperature
Working Temperature: It can reach at about 200°C / 390°F within a few seconds
Rated Power: 300W
Power Type: AC power supply
Rated Voltage: 110V
Plug Type: US plug
Power Cable Length: 95cm/37 inch
1 * Hot Air Gun
1 * User Manual
1. This kind of heat gun can not adjust the temperature but it heats up quickly at about 200°C theoretically.
2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
3. Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed.
4. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
5. Caution with child ! ! ! Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!
6. Do not use it continuously for more than 10 minutes to avoid overheating the machine!
7. Do not touch the hot nozzle when using or just after use.
3. Heat Gun 6.6ft Cable Dual-Temperature 300W Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp Heat Tools
- 【Dual-Temperature HEAT GUN】Dual Temperature (0-200℃-300℃). 6.5ft Cable Hot Gun is We specialize in designing DIY hot air fan for American customers. Mini Heat Gun Electric110V 300W 200°C / 300°C Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-hold Heat Tools
- 【SAFETY HOT GUN】The temperature control device is arranged in the hot air gun circuit. When the current abnormally rises to a certain height with abnormal heat, the temperature control cuts off the current itself, which protects the safe operation of the circuit and eliminates the occurrence of dangerous situations such as high temperature melting and fire. The body is made of ABS which has some functions such as heat resistance, low temperature resistance and so on
- Outlet is made of stainless
- 【6.6FT CABLE AND METAL BRACKET】UL safety certified extra long cable, you can use it flexibly in the 6.6ft range. Stainless steel bracket can whirl about 100 degree and it can stand on the table safely
- The left and right sides have a heat sink which can reduce th internal temperature and prolong the service life.
- 【EASY TO USE】 It is very easy to use it. Just keep about 3-5cm distance from your DIY craft and heat it at about a 45 degree angle so that avoiding hurt by it
- The temprature can not be adjusted, but it can reach at about 200°C / 300°C in few seconds which heat up quickly and works like a charm.
- 【WHAT YOU GET】 1pcs 300W Hot Air Gun, 12 month Warranty, [100% Money Back Guarantee] If you’re not happy for any reason, simply contact us and we’ll give you a full product refund, no questions asked and no need to return the product.
100% Brand New and High Quality ABS and PC plastic material, it equip with the stainless steel bracket to rotate 100 degress. It is Very compact and durable, practical
Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness
There are heat vents in left and right sides to decreased the internal temp and extend its lifetime
This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun
The temprature can not be adjusted, but in theory, it can reach at about 200 degree within a few seconds abstractly. But do not use it more than 10 minutes, just you can turn off then turn on again for working continuously
Material: Plastic ABS+PC
Cable length: 6.56FT /180 cm
Rated Power: 300W
Working time: 8 minutes
Power type: AC power supply
Type: Constant temperature
-Do not touch with water! Do not touch the hot nozzle.
-Do not use outdoor. Keep it out reach of children. Keep 5-6cm distance between the heat tool and itrm.
-Do not use more than 10 minutes continuously to prevent overheated.
-This hot air gun is specially made for DIY, it can’t not use in industry aspect
1 x Hot Air Gun
4. SUPCO FCR6 Heating and AC Fin Comb
Heating & AC Fin Comb. 8 To 20 Fins per inch Heating & AC Fin Comb. FIN COMB SET OF 6. 8 TO 20 FINS PER INCH
From the Manufacturer
Heating & AC Fin Comb. 8 To 20 Fins per inch Heating & AC Fin Comb. FIN COMB SET OF 6. 8 TO 20 FINS PER INCH.
5. 110V 300W Mini Portable Heat Gun for Heat Shrink Tubings and Drying Paint Hand-Hold Hot Air Gun
- 【MATERIAL】The mini heat gun is made of high-quality ABS plastic exterior and stainless steel inside, portable, simple and durable.
- 【DIMENSION】 Product dimension: 9-in x 1.7-in. The wire length of the heat shrink gun is 39-in. Built in a heat sink makes the internal temperature of the hot air gun is reduced and life is prolonged.
- 【FUNCTION】The portable hot air gun heats up in seconds and quickly gets hot temperature up to 200°C/390°F. Please DO NOT make it work more than 8 minutes in one time, also please DO NOT get too close to the material.
- 【APPLICATION】NEX heat shrink gun Comes with an additional replaceable protecting cap, it’s great for rubber stamp, embossed powder, heat shrinkable film, heat shrink tubings and drying paint, etc.
- 【ATTENTION PLEASE】All of the NEX Mini Hot air Gun are sold only by “toppowersellerus”, in order to offer all the customer’s a pleasant shopping experience, we will take responsibility to all our customer purchased from us. If you received the item without the NEX logo on the box, you will have an opportunity to get a DOUBLE REFUND. Please DO NOT trust any counterfeit seller. Thanks for your support!
NEX is our legal trademark in US.
We always focus on looking for items of elaborately designed and affordable price for customer. If there is any problem with your purchase, please contact our customer service directly. We will reply you in 12 hours and give you a reasonable solution.
Color: White(body) + Blue(protecting cap)
Size: 9*1.7-in, wire length: 39-in
Type: Constant temperature
Working temperature: 200℃
Rated power: 300W
Power type: AC power supply
Working Time: 8 minutes
1. Plug in the heat tool.
2. Hold the gun but do not touch the hot nozzle.
3. Keep a distance of 3-5cm from the vent,heating at an angle of about 45 degrees until the completion of the work.
4. Turn off the power to stay cooling.
1. This kind of gun can not adjust the temperature but it heats up quickly at about 200℃ theoretically. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
3. 100% satisfaction guarantee, 100% worry-free guarantee, 1-year manufacture guarantee! 30-day return & money back guarantee, we offer premium quality and the best service, no matter what reason cause dissatisfaction, we’ll replace it or reimburse you every cent back!
1 x Heat Gun
1 x Instruction
2 x Protecting Cap
6. Mini Heat Gun, TACKLIFE 350W 662°F Handheld Hot Air Gun, 6.56Ft Ultra Long Cable for DIY Craft Embossing, Shrink Wrapping and Drying Paint- HGP35AC
- ❤ Please feel free to contact us if you have any problem!❤
- ????High Power and Quickly Heat Up: With max power 350W, it can reach at about 350°C/662°F easily within a few seconds which can make the work more quicker and more efficient
- With Nickel-chromium heating wire structure&mica bracket, it can speed up heat dissipation and extend the service life
- ????Compact Design and Extra Accessories: Simple and lightweight design with stainless steel tuyere, PC& PA6+30GF outside, which makes it more durable.Easy to use with non-slip soft glue
- With an extra spoon reflector, it will be more convient for heating shrinkable tube
- ????Wide Application and Esscential for DIY: Wide use and perfect for DIY projects. It can be used to burn powder,remove old painting,heat to shrink film, defrost and remove mud and dirt etc.If you like DIY, it can be used for making handmade candle,rubber stamp and so on
- ????Long Cable and Extensive Handcrafting:With 6.56Ft (2M) extended cable, longer more than any other mini heat guns, it is easier for you to handle wider, you can do what you want with it
- ????Package Included and After-sale service:Tacklife HGP35AC MINI Heat Gun
- A spoon reflector
- User Manual
- A Card
- We promise that customers can enjoy our worry-free customer service
7. Genesis GHG1500A Dual Temperature Heat Gun Kit with Four Metal Nozzle Attachments
- 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
- High and Low Temperature Settings for Versatility
- Deflector Nozzles Protect Glass and Other Surfaces
- Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
- Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
- Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
- Warm RC engines to assist with start up
Discover the many uses of the Genesis 1500W Dual Temperature Heat Gun.
It’s a Versatile Tool for Stripping Paint and Varnish, Softening Caulking and Putty for Removal, Removing Adhesive Labels, Thawing Pipes, Gutters, Freezers, or Radiators, Loosening Rusted Nuts and Bolts, Speed-Drying Epoxy, Cement, or any Damp Surface.
Reach for the Genesis Heat Gun to light your charcoal grill, warm RC engines to help with starting, and so much more..
-Powerful 12.5 Amp Motor Delivers Heat with 1500 and 750 Watt settings.
-Stand the Heat Gun on its back for an Integrated Stand for Convenience
-Easy to Use design can be used with a single hand
-Two Deflector Nozzles, A reflector nozzle, and Air Reduction Nozzle are Included
Simply stand the unit up on the back side with the exhaust end pointed upward to cool or as a heat gun stand while you heat shrink wire insulators.
Make the Genesis Dual Temperature Heat Gun part of your tool set today and discover what Genesis Tools can do for you!
The Genesis GHG1500A is UL listed and ETL Certified, and meets all product safety requirements to be sold in the United States.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,gases,or dust.Power tools create sparks which may ignitethe dust or fumes
8. OEMTOOLS 24444 5 Adapters Cooling System Refiller Kit
- Quickly Refills Cooling System and Eliminates Trapped Air
- Performs Vacuum Leak Tests on the Cooling System
- Helps Prevent Comebacks and the Threat of Engine Damage
- Five Additional Bushings and Tapered Cone Adapter to Cover Most Vehicle Cooling Systems
- Universal Adapter Forms an Airtight Seal With Most Radiator and Coolant Bottle Necks. No Custom Adapters Required
- Comes in Sturdy Blow Mold Storage Case
9. SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit Variable Temperature Control with 2-Temp Settings 4 Nozzles 122℉~1202℉（50℃- 650℃）with Overload Protection for Crafts, Shrinking PVC, Stripping Paint
- ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min
- II: 50-650℃, 250-500L/min
- ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉
- Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
- ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders
- Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
- ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface
- Two concentrator nozzles direct a concentrated heat flow to the work surface
- Reflector nozzle disperses heat flow evenly around the whole work surface
- ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
10. Wagner Spraytech Wagner 0503038 HT400 Heat Gun 650ᵒF Basic pack
- DURABLE HEAT GUN: The HT400 precision heat tool is a versatile tool for home, shop and hobby projects and has a 650°F (343°C) temperature setting
- MANY APPLICATIONS: This versatile heat gun tool can be used for electrical repair, embossing, stripping paint, bending plastic pipe, shrink wrapping and tubing, and more
- PRECISE CONTROL: Small size makes this an ideal heating tool for getting into hard-to-reach places and concentrating high heat on small areas
- COMPACT DESIGN: Pencil-like design and 360 watts of power makes this heat tool great for delicate projects. The power tool fits comfortably in the user’s hand and weighs only a pound
- HANDS FREE FEATURE: Use the installed, retractable stand for hands free operation to easily complete all of your household heating and electrical projects
The HT400 Precision Heat Tool is a versatile tool for home,shop and hobby projects. Its small size is ideal for getting into hard to reach places and working on delicate projects related to crafting and electronics. Its simple design has one temperature setting of 650ºF and an integrated stand for hands-free work.
From the Manufacturer
The HT400 Heat Gun gives outstanding performance in a small package. The heat gun is ideal for crafts and hobbies. Use it to apply embossing powders, applique and shrink wrap. Remelt adhesives and form plastic material. It is also great for applying electrical shrink wrap.
By our suggestions above, we hope that you can found Heating And Air Tools for you.Please don’t forget to share your experience by comment in this post. Thank you!