Top 9 Induction Heating Power Supply

0
758 reviews analysed

1. Treedix 5-12V ZVS Low Voltage Induction Heating Power Supply Module with Coil Power Supply Heating Power Supply Module

Treedix 5-12V ZVS Low Voltage Induction Heating Power Supply Module with Coil Power Supply Heating Power Supply Module

Feature

Description

Specification:
Input Voltage:DC 5V~12V
Max Power:120W
PCB Size:55 x 37 x 1.6 mm

Package Included:
1 x ZVS heating Power Source module
1 x heating coil

Note:
1. When inductive heating, usually work for 5 minutes to power off cooling. Because the current is relatively large during induction heating, the coil heat is also relatively large. When heating, part of the heat generated by the heated object is transmitted to the heating coil. For a long time, the temperature of the heating coil is high. If the heating coil is connected to the terminal, the plastic part of the terminal will be melted. Therefore, when induction heating, it is best to solder the heating coil directly to the PCB
2. Only some types of materials can be effectively induction heated – mostly magnetic materials such as steel. Materials such as brass, copper and aluminum will be very difficult to heat.
3. A large capacitor placed in parallel with the supply voltage can help reduce the voltage/current drop that prevents the unit from starting.
4. This module should not be operating when no load, otherwise it might burn out the circuit.
5. You can check whether the blue LED indicator light up to see if the power is supplied or the module can functionally work. When the indicator is dim, maybe the power supply is insufficient, should use a higher power supply. Just make sure the power supply is within DC 5-12V.
Remark: You can solder the heating coil on the board.

2. LeaningTech 5V~12V Zero Voltage Switching ZVS Induction Heating Power Supply Module + Coil Power Supply Heating Power Supply Module

LeaningTech 5V~12V Zero Voltage Switching ZVS Induction Heating Power Supply Module + Coil Power Supply Heating Power Supply Module

Feature

Description

Specification: Input voltage: 5v-12v Module dimensions:5.542 cm(LWH) Product Weight: 119g Coil size: length:7.5cm width: 2.8cm Features: ZVS heating power supply module including heating coil Input voltage DC5V-12V(We are not guarantee the module will work when the voltage is over 12V or less than 5V) Maximum power 120W(when 12V eddy-current heating) Ensure all the components welding right,power line connect in right way,than to set up an electric circuit. The width of the heated object is as far as possible between the 1/3~1/2 of the inner diameter of the heating coil, the maximum not more than 2/3! Package Included: 1 pc ZVS heating power supply module 1 pc heating coil

3. YosooFdit Induction Power Heating Supply Module 5V-12V ZVS Low Voltage Heating Tool with Coil Power Supply Module

YosooFdit Induction Power Heating Supply Module 5V-12V ZVS Low Voltage Heating Tool with Coil Power Supply Module

Feature

Description

Description:
Note: the product is ZVS heating Power Source module, include the heating coil.

1, this no tap mini plate ZVS finished board, with no ignition coil and a cooling fan, etc.
2, the input voltage DC 5 v to 12 v.
3, maximum power 120 w (12 v induction heating). 12 v, push the ignition coil primary 5 + 5 turn, about 30 w.
4, PCB size: 55 mm * 37 mm * 1.6 mm.
5, heating coil, the width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most don’t more than two-thirds.
6, induction heating, power work five minutes to cool. For induction heating current is larger, heating coil is relatively large. When heated, part of the heat generated by the heated object will be passed on to the heating coil, over time, the temperature of the heating coil will be high. If the heating coil in the words of the terminal, the terminal part of plastic melt!!!! Therefore, induction heating the best heating coil directly welded to the PCB.

package include:
1 x ZVS heating Power Source module
1 x heating coil

4. Bewinner 2000W High Voltage Induction Heater Module Flyback Driver Heating Board(US Plug 100-240V)

Bewinner 2000W High Voltage Induction Heater Module Flyback Driver Heating Board(US Plug 100-240V)

Feature

5. Induction Heating Module ZVS Low Voltage Induction Heating Board Driver Heater DIY High Frequency Induction Heating Machine Module 1800W 12V-48V

Induction Heating Module ZVS Low Voltage Induction Heating Board Driver Heater DIY High Frequency Induction Heating Machine Module 1800W 12V-48V

Feature

Description

Features:
Maximum power of 1800W, super PCB layout design and super heat sink, superior heat dissipation effect.
12-48V low voltage DC power supply with a maximum current of 40A. It can work continuously for several hours with good heat dissipation.
Can use graphite crucible to melt gold, silver, copper, aluminum and other metals, heating evenly, fast and very convenient.
With a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc.
It is recommended not to exceed 48V 35A to prevent accidents and damage.

Due to its moderate power, it can be used by DIY players to give smaller players the parts can be treated by quenching, annealing and other heat treatment.
You can also be melted with graphite crucible Kim, Silver, Copper, aluminum and other metal, heating evenly, is fast and very convenient.

Package Included:
1 x PCB board
1 x 48V copper tube

6. ZVS Driver Module,5V-12V ZVS Low Voltage Induction Heating Power Supply Board+Heating Coil

ZVS Driver Module,5V-12V ZVS Low Voltage Induction Heating Power Supply Board+Heating Coil

Feature

Description

Specification:
Input voltage: DC 5v-12 v
Maximum power 120w (12 v induction heating). 12 v, push the ignition coil primary 5 + 5 turn, about 30 w.
PCB size: 55 mmx37 mmx1.6 mm
Heating coil, the width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most not more than two-thirds.

Package Included:
1 x ZVS driver board
1 x heating coil

7. 1000W 20A ZVS Low Voltage Induction Heating Board Module Tesla with Coil 12V-48V Flyback Driver Heater DIY

1000W 20A ZVS Low Voltage Induction Heating Board Module Tesla with Coil 12V-48V Flyback Driver Heater DIY

Feature

Description

Features:
24V input with no load current of 3A , 48V input with no load current of 6A
buyer need self-provided power and water cooling device
This circuit can do induction heating, or replace copper tube with high frequency transformer, it will be a powerful inverter

Note:
The kit contains a full set of driving circuit elements and brass
Buyers need to bring their own power and cooling unit.
The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload

Package Includes:
1 x 20A 1000W Flyback driver inductive heater Zero Voltage Switching Tesla
1 x Coil

8. 2500W Induction Heating Board DC 12V ZVS Induction Heating Board Flyback Driver Heater DIY High Frequency Induction Heating Machine Module with Spiral Coil and Water Pump

2500W Induction Heating Board DC 12V ZVS Induction Heating Board Flyback Driver Heater DIY High Frequency Induction Heating Machine Module with Spiral Coil and Water Pump

Feature

Description

Specification:

Condition: 100% brand new
Item Type: Induction Heating Board
Material: copper
Color: as picture shown
Pump input voltage: DC 12V
Input voltage: 12V-48V recommend 36 V
Power: 12 V: ≥ 10A, 15V: ≥ 20A
Maximum power: 2500W
Maximum current: 50A

Package List:

1 x Induction Heating Board
1 x Spiral Tube
1 x Water Pump

9. KOOBOOK 1Pcs 1000W ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater 12V-48V DIY

KOOBOOK 1Pcs 1000W ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater 12V-48V DIY

Feature

Description

Specifications:
Inside diameter of the coil: approx. 40mm
Height of the coil: approx. 50mm
24V input with no load current of 3A
48V input with no load current of 6A
It suits 12-36V power supply (not included)
The coil accept 40mm crucible

Note:
The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.
This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.

We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.

Package Includes: 1Pcs
1 x ZVS low voltage induction heating board
1 x brass coil

Conclusion

By our suggestions above, we hope that you can found Induction Heating Power Supply for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general