Top 10 Kitchenaid Dishwasher Sound Shield

Genuine Original Equipment Manufacturer (OEM) parts! This tub insulation (part number 154858701) is for dishwashers. Tub insulation 154858701 covers the outside top and sides of the dishwasher tub. Unplug the dishwasher and shut off the water supply before installing this part. For Frigidaire & Crosley.

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Replaces the following part numbers:
WP8269145, WP8269145VP.

Works for brands:
KitchenAid, Whirlpool, Kenmore, Maytag, Jenn-Air, Amana, Estate, Magic Chef, Inglis, Crosley, Roper.

Fixes problem with:
Door latch failure.
Door won’t close.

Contact Us
If you are not sure if part is correct, ask us in Customer questions & answers section or contact us by visiting the Discount Parts Direct storefront.

Business Wholesale
We are a small local company from Houston, Texas offer discount parts for retail and wholesale. If you need to purchase parts for business , please contact us for lower rates.

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: Frigidaire (FRIGB) 154641601 Dishwasher – Pin

Product Features：

1.Made of FDA approved food-safe high density plastic, flexible silicone edge, it is sturdy and durable. Perfect for healthy cooking, it can be in contact with food and is safe and harmless.

2.It also serves as excellent spatula blade attachment to wipe the bowl clean when pouring finished batters and frostings from the bowl after mixing job done.

3.Perfectly matched to the interface of your KitchenAid mixer, it does not make a noisy sound when used and efficiently completes the mixing process.

Product Specification:

Material: Food grade plastic and resin silicone

Size: 7.48*6 inch / 19*15 cm

Package Contents: 1 x 5 Quart Flex Edge Beater

Replacement For KitchenAid Bowl-lift Stand Mixers:

5 Quart Bowl-lift Stand Mixer Bowls:

Professional 5 & 500: K4SS, K5SS, KSM5, KP50PS, KPM5, KPM50, KSM50HDP, KSM500, KSMC50, KG25H3X, KG25H7X, KG25H0X, KM25G0X, RRKP50, 4KSM50PWH, 4K5SS, KSM45, 5KPM5, K5-A.

Not Suitable: Professional 5 plus mixer, 4.5-5 Quart Tilt-Head Stand Mixer.

Main Mixing Jobs:

For light to medium-heavy mixture, like: Biscuits, Cookies; Quick Breads; Cheesecakes; Devils Food Cake; Waffle dough; Mashed potatoes; Pie pastry; Creamed Frostings and more.

But Do not use with heavy mixes such as breads, coffee cakes, rolls and buns, which should turn to dough hook or that flat beater without silicone edge.

Part 8269145 comes in a pack of two. Mounting brackets secure the top of the dishwasher to the underside of a cabinet or countertop. If your dishwasher moves, shakes, or tilts forward, it may be time to replace one or both of the mounting brackets. The PartsBroz 8269145 bracket set fits and performs just like the original. Use it with a variety of top name brand dishwashers.

Installation Tips

Before beginning the repair, disconnect the dishwasher from its power source. Depending on the model, you may also need to disconnect the water supply. You’ll need a pair of needle nose pliers and a screwdriver to complete the repair. Make note that brackets typically wear down at the same rate, so be sure to check both brackets and replace both if needed.

Replacing your dishwasher’s mounting brackets is a simple way to get your dishwasher running like normal.

Have any of these problems? These brackets can help:

• Door won’t latch shut
• Door won’t close
• Noisy dishwasher

Part 8269145 is a functional equivalent for part numbers: 8269145, WP8269145, AP3039168, PS393134, 830941, AH393134, and EA393134.

Compatibility

It works with top dishwasher brands and many of their models. These include:

• Whirlpool
• KitchenAid
• Kenmore
• Maytag
• Jenn-Air
• Amana
• Estate
• Magic Chef
• Inglis
• Crosley
• Roper

Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section, or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number for your dishwasher.