Top 10 Vega Water Cooling

0

Finding your suitable readers for vega water cooling is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for vega water cooling including detail information and customer reviews. Let’s find out which is your favorite one.

701 reviews analysed

1. Watercool HEATKILLER IV GPU Water Block for RX Vega 56 and 64, RGB, Acryl Ni/Black

Watercool HEATKILLER IV GPU Water Block for RX Vega 56 and 64, RGB, Acryl Ni/Black

Feature

Description

Color:Acryl Ni / Black

The HEATKILLER® IV VGA series is the climax of 15 years of experience in designing and manufacturing high-performance water cooling equipment. Only the best features of the previous generations were merged together to provide an even more powerful water block.

We continued the GPU cooling structure of the successful HEATKILLER® GPU-X³ series and enhanced it with the central flow design, already known from the HEATKILLER® GPU-X² series. Then, we did some improvements: the combination of an extremely fine microstructure right above the GPU and a reduced residual base thickness delivers an even better cooling performance. We also improved the overall flow rate by constructing all channels as wide as possible. All relevant secondary components, such as memory or voltage regulation modules are also directly cooled by the fluid.

There are two different possibilities to illuminate the block. We offer single color LED strips that connect directly to the card’s onboard LED header (sold separately). But we also offer RGB LED strips that come with a black paracord sleeved cable that can be routed out of the block and can connect to both motherboard LED headers or third-party LED control units, hence integrating the card into existing illumination concepts.

Technical specifications:
Material: electrolytic copper, POM, PLEXIGLAS® GS, black anodized aluminum
Dimensions: (LxWxH) 266 x 118 x 18,5 mm
Weight: 800g
Connector: 4x G ¼ Inch (DIN ISO 228-1)
Pressure tested: 2 bar
Compatible with: AMD Radeon RX Vega 56 (reference layout), AMD Radeon RX Vega 64 (reference layout), AMD Radeon Vega Frontier Edition (reference layout)

Scope of delivery:
1x HEATKILLER® IV for RX Vega 56 and 64 – ACRYL Ni-Bl
1x Mounting material / manual

Model: 15048

2. B BYKSKI RGB VGA GPU Water Cooling Block for AMD Radeon Vega Sapphire Dataland XFX Yesion Frontier Edition

B BYKSKI RGB VGA GPU Water Cooling Block for AMD Radeon Vega Sapphire Dataland XFX Yesion Frontier Edition

Feature

Description

100% new, fine workmanship, simple sense is very strong!
A-VEGA-FE-X built for AMD Radeon Vega Frontier Edition Graphics design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
Fast twist X 2
plugs X 2
Thermal paste X 1
mounting screws X 1
LED X 1
Compatible graphics card type:AMD RADEON VEGA FE
Compatible graphics card type:AMD RADEON RX VEGA 64
Compatible graphics card type:AMD RADEON RX VEGA 56
Compatible graphics card type:Sapphire RX VEGA 64 8G HBM2 LIQUID COOLING
Compatible graphics card type:Sapphire RX VEGA 64 8G HBM2 LIMITED EDITION
Compatible graphics card type:Sapphire RX VEGA 64 8G HBM2
Compatible graphics card type:Sapphire RX VEGA 56 8G HBM2
Compatible graphics card type:Dataland RX VEGA 64 8GB HBM2 LIQUID
Compatible graphics card type:Dataland RX VEGA 64 8GB HBM2
Compatible graphics card type:Dataland RX VEGA 56 8GB HBM2
Compatible graphics card type:XFX Radeon RX VEGA 56 8GB
Compatible graphics card type:Yesion RX VEGA 56 8GB HBM2
NOTE:Before buying, please contact the seller, the GPU WATER COOLING BLOCK compatible models, factory often modify graphics PCB, so in order to avoid after the purchase is not compatible .

3. NZXT Kraken G12 – GPU Mounting Kit for Kraken X Series AIO – Enhanced GPU Cooling – AMD and NVIDIA GPU Compatibility – Active Cooling for VRM, Black

NZXT Kraken G12 - GPU Mounting Kit for Kraken X Series AIO - Enhanced GPU Cooling - AMD and NVIDIA GPU Compatibility - Active Cooling for VRM, Black

Feature

Description

Color:Black

Quickly mount any Kraken Series liquid cooler onto graphics cards with the Kraken G12 mounting kit. It delivers a 40% increase in cooling capacity over stock cooling, and features a newly designed bracket with an easier installation process versus the Kraken G10. Plus, the G12 is compatible with more than 30 liquid coolers on the market.

Compatibility – Graphic Cards
Nvidia
Titan X, Titan, Geforce GTX 1080 Ti, 1080, 1070, 1060, 980 Ti, 980, 970, 960, 780 Ti, 780, 770, 760, 680, 670, 660Ti, 660, 580, 570
\AMD
RX 480, 470, R9 390X*, 390*, 380X*, 380, 290X*, 290*, 285*, 280X*, 280*, 270X, 270, R7 370, HD7970*, 7950*, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830
* Some variations in AMD die height may require the use of a copper shim which is not included.

Compatibility – AIO Liquid Coolers
NZXT
Kraken X72, X62, X52, X42, X61, X41, X31, X60, X40

Corsair
H105, H110, H90, H75, H55, H50 (CW-906006-WW only)

Thermaltake
Water 3.0 Riing RGB 360, 280, 240, Red 280, 140,
Water 3.0 Ultimate, Extreme S, Extreme, Pro, Performer
Water 2.0 Extreme, Pro, Performer

Antec
KUHLER H2O 920V4, 620V4, 920, 620

Zalman
LQ-320, LQ-315, LQ-310

4. EKWB EK-FC Radeon Vega RGB Upgrade Kit

EKWB EK-FC Radeon Vega RGB Upgrade Kit

Feature

Description

An RGB upgrade kit for existing EK-FC GeForce GTX FE high-performance full-cover water blocks that fit AMD® Radeon® Vega based graphics cards. The upgrade kit includes a 4-pin 12V RGB LED strip.

The kit enables a quick and easy upgrade of the existing EK-FC Radeon Vega to the latest RGB version of the full-cover water block. The kit includes all necessary parts to perform the upgrade, including a fresh set of screws, thermal pads, O-rings, Allen keys, new RGB ready plexi top, aluminum cover with an already installed RGB strip and a fresh EK badge. The only things reused from the previous block are the nickel plated cold plate and the terminal.

To avoid cracking your brand new RGB plexi top, use only 0.5 – 0.7 Nm of torque force on the terminal screws. Do not use excessive force when re-tightening the screws as the plexi top might crack or the threads might get stripped thus rendering the water block useless.

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header.

EK RGB ALL

Enclosed:

– EK-FC Radeon Vega RGB plexi top
– Mounting mechanism with screw-in brass standoffs
– Black anodized aluminum cover
– 4-pin 12V RGB LED strip
– Necessary mounting screws
– 2,5mm Allen key
– 2mm Allen key
– Thermal pad 0.5mm
– Thermal pad 1mm
– Pre-formed Main O-ring
– 2x spare O-rings (OR 15×1)
– EK badge

Made in Slovenia – Europe!

Model: 3830046996831

5. EKWB EK-FC Radeon Vega Strix RGB GPU Waterblock, Nickel

EKWB EK-FC Radeon Vega Strix RGB GPU Waterblock, Nickel

Feature

Description

EK-FC Radeon Vega Strix RGB is a high-performance full-cover water block for ASUS ROG Strix RX VEGA64 OC graphics card that comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, HBM2 memory, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC Radeon Vega Strix water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC Radeon Vega Strix RGB water block is compatible with popular RGB sync technologies from all major motherboard manufacturers since it features a classic 4-pin 12V RGB LED strip. Note: ASUS ROG Strix RX VEGA64 OC factory backplate is not compatible with this water block!

Model: 3830046995667

6. EKWB EK-FC Radeon Vega RGB GPU Waterblock, Nickel

EKWB EK-FC Radeon Vega RGB GPU Waterblock, Nickel

Feature

Description

EK-FC Radeon Vega RGB is a high-performance full-cover water block for multiple AMD Radeon Vega based graphics cards that comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, HBM2 memory, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC Radeon Vega water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. You can easily remove the LED strip cover which is mounted with two screws to replace the LED strip with some other type LED strip. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. See EKWB site for full video card compatibility list.

Model: 3830046995834

7. EKWB EK-FC Titan V GPU Waterblock, Nickel

EKWB EK-FC Titan V GPU Waterblock, Nickel

Feature

Description

EK-FC Titan V is a high-performance full-cover water block for the most powerful PC GPU – NVIDIA Titan V, Volta architecture-based graphics card. This water block directly cools the GPU, HBM2 memory, and VRM (voltage regulation module) as well! Water is channeled directly over these critical areas, thus allowing the graphics card and it’s VRM to remain stable under high overclocks and to reach full boost clocks. EK-FC Titan V water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. EK also encloses a single-slot I/O bracket which replaces the original two-slot in order to make installation of multiple graphics cards easier and also transforms the GPU into a gorgeous single slot solution. EK recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section. The EK-FC Titan V water block is backward compatible with all EK-FC Titan V Backplates.

Model: 3830046995742

8. Thermaltake Water 3.0 ARGB Motherboard Sync Edition Intel/AMD 240 All-in-One Liquid Cooling System 2X 120mm High Efficiency Radiator CPU Cooler CL-W233-PL12SW-A

Thermaltake Water 3.0 ARGB Motherboard Sync Edition Intel/AMD 240 All-in-One Liquid Cooling System 2X 120mm High Efficiency Radiator CPU Cooler CL-W233-PL12SW-A

Feature

Description

Style:ARGB |  Size:240mm

Thermaltake water 3. 0 240 ARGB sync Edition comes with two 120 mm fan with a large surface radiator, high Performance water block and pump for ultimate CPU cooling. The built-in pure ARGB fan features compression blades, hydraulic bearing, and 16. 8 million colors LEDs that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. Users can easily switch RGB lighting effects using the ARGB Controller that is included in the packet, or by ASUS aura Sync, gigabyte RGB FUSION, MSI Mystic Light Sync and as rock polychrome software. Water 3. 0 ARGB sync Edition series allows users to enjoy better cooling performance and greater CPU protection! Block compatibility Intel: LGA 2066/2011-3/2011/1366/1156/1155/1151/1150AMD: AM4/FM2/FM1/AM4/AM3+/AM3/AM2+/am2cpu Plate material: copper Pump motor speed: 3600 prorated voltage: 12 V & 5vPower input: 12V – 3. 9 W, 5V – 1. 06 Radiator Dimensions: 270 x 120 x 27mmRadiator material: aluminum Fan Dimension: 120mm x 120mm x 25mmFan RPM: PWR 500 1500 prorated voltage: 12 V & 5vPower input: 12V- 1. 44 W, 5V – 1. 6W (one fan)Fan Air flow: 56. 45 CFM fan noise: 25. 8 db. -alight modes: wave, full lighted, RGB spectrum, LED off, flow, ripple, Pulse, and blink Preset colors: red, yellow, green, teal, blue, White, Purple, and rainbow LED speed: 4 levels color: RGB color selector options with 16. 8 million colors Tube Dimension: 326mm (length)Tube material: rubberFeatures motherboard synchronization manual LED control with a RGB controller high performance copper base plate design accelerates heat conductivity supports up to (4) 120mm fans for push/pull configurations. custom designed 120mm large surface aluminum radiator High quality pump enables maximum water circulation and worry free maintenance includes universal mounting kit for multiple CPU socket configurations factory filled coolant requires no refill easy installation with maintenance-free operationPackage contents Thermaltake water 3. 0 a RGB sync 240mm radiator liquid CPU system(x2) 120mm pure a RGB sync fan w/ ARGB controller(x2) motherboard signal bridge Cable (ASUS, MSI, as rock and gigabyte)radiator and fan mounting screws (Corse/fine screws both included), quick start Guide

9. Bykski AMD Vega 56 Nano Full Coverage GPU Water Block – Clear (A-XF56-NANO-X)

Bykski AMD Vega 56 Nano Full Coverage GPU Water Block - Clear (A-XF56-NANO-X)

Feature

Description

The Bykski AMD Vega 56 Nano Full Coverage GPU Water Block is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.

The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.

Features

  • Finest Craftmanship
  • Designed to Fit Standard G1/4 Thread Fittings
  • SLI/Crossfire Compliant

Specifications

  • Model:A-XF56-NANO-X
  • Brand:Bykski
  • Material:Electroplated High Purity Copper / Clear Acrylic

Compatibility

  • (Including but not limited to the following models)
  • Reference Design AMD VEGA56 NANO
  • compatibility based on reference design only, block may not fit altered / super clocked and other third party variations that deviate from reference design.
  • Fittings:G 1/4 Thread
  • Stock Backplates:Due to mounting variances between cards, stock backplates not guaranteed to fit.

Parts Included

  • 1x Full Coverage GPU Water Block
  • 2x Stop Fitting
  • 1x Mounting Hardware
  • Thermal grease
  • 1x 5v Addressable RGB (RBW)
  • Fittings NOT included

Warnings

This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it.

Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions.

PrimoChill is not…

10. Bykski Asus ROG Strix Radeon RX Vega 64 Full Coverage GPU Water Block – Clear (A-ASVEGA-Strix-X)

Bykski Asus ROG Strix Radeon RX Vega 64 Full Coverage GPU Water Block - Clear (A-ASVEGA-Strix-X)

Feature

Description

The Bykski Asus ROG Strix Radeon RX Vega 64 Full Coverage GPU Water Block is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.

The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.

Features

  • Finest Craftmanship
  • Designed to Fit Standard G1/4 Thread Fittings
  • SLI/Crossfire Compliant

Specifications

  • Model:A-ASVEGA-STRIX-X
  • Brand:Bykski
  • Material:Electroplated High Purity Copper / Clear Acrylic

Compatibility

  • (Including but not limited to the following models)
  • Asus ROG Strix Radeon RX Vega 64
  • compatibility based on above card design only, block may not fit altered / super clocked and other third party variations that deviate from this design.
  • Fittings:G 1/4 Thread
  • Stock Backplates:Due to mounting variances between cards, stock backplates not guaranteed to fit.

Parts Included

  • 1x Full Coverage GPU Water Block
  • 2x Stop Fitting
  • 1x Mounting Hardware
  • Thermal grease
  • 1x RGB LED
  • (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.

Warnings

This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it.

Manufacturer reserv…

Conclusion

By our suggestions above, we hope that you can found Vega Water Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general